Split System
The split system design of the heat pump, consisting of an indoor and outdoor unit, requires specialized installation by an installer qualified to work with refrigerant gases. The advantage of this solution is that there is no risk of freezing of the heating medium in case of power failure. Unlike monoblock pumps, the unit outside the building uses a non-freezing refrigerant.
Features:
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
R32 environmental refrigerant
Wotech is a pioneer in launching heat pumps equipped with R32. With a lower Global Warming Potential (GWP), the R32 is equivalent in power to standardrefrigerants, but achieves higher energy efficiency and lower CO2, emissions.Easy to recover and reuse, R32 is the perfect solution for attaining the new European CO2, emission targets.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
MITSUBISHI Compressor
we choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Split Series Application Diagram
Full inverter technology
DC inverter conversion techniques can achieve equilibrium temperatures, saving power and energy. It adopts DC frequency conversion continuously variable adjustment, which has the advantages of strong power, high efficiency, low noise, stable and reliable performance, and long service life.
Climate curve
Users can set up the system according to their ideal comfort levels based on the changing levels of heat demand, insulation, etc., with proprietary Heating Curve Logic. By continually monitoring and adjusting the outlet water temperature in opposite directions with the current ambient temperature levels, the Wotech air to water heat pump will ensure optimal comfort in the living spaces by adjusting the outlet water temperature based on the ambient temperature.
Eco mode
Once ECO mode is slected, Wotech air to water heat pump sets the outlet water temperature automatically according to the outdoor ambient air temperature.
Split System
The split system design of the heat pump, consisting of an indoor and outdoor unit, requires specialized installation by an installer qualified to work with refrigerant gases. The advantage of this solution is that there is no risk of freezing of the heating medium in case of power failure. Unlike monoblock pumps, the unit outside the building uses a non-freezing refrigerant.
Features:
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
R32 environmental refrigerant
Wotech is a pioneer in launching heat pumps equipped with R32. With a lower Global Warming Potential (GWP), the R32 is equivalent in power to standardrefrigerants, but achieves higher energy efficiency and lower CO2, emissions.Easy to recover and reuse, R32 is the perfect solution for attaining the new European CO2, emission targets.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
MITSUBISHI Compressor
we choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Split Series Application Diagram
Full inverter technology
DC inverter conversion techniques can achieve equilibrium temperatures, saving power and energy. It adopts DC frequency conversion continuously variable adjustment, which has the advantages of strong power, high efficiency, low noise, stable and reliable performance, and long service life.
Climate curve
Users can set up the system according to their ideal comfort levels based on the changing levels of heat demand, insulation, etc., with proprietary Heating Curve Logic. By continually monitoring and adjusting the outlet water temperature in opposite directions with the current ambient temperature levels, the Wotech air to water heat pump will ensure optimal comfort in the living spaces by adjusting the outlet water temperature based on the ambient temperature.
Eco mode
Once ECO mode is slected, Wotech air to water heat pump sets the outlet water temperature automatically according to the outdoor ambient air temperature.
Market model | WW08VM-O | WW12VM-O | WW16VM-O | WW20VT-O | |||||
Heating | Output Capacity | Kw | 3.23-8.20 | 4.78-12.13 | 6.58-16.71 | 8.14-20.67 | |||
Input Power | Kw | 0.58-1.75 | 0.89-2.75 | 1.21-3.72 | 1.45-4.24 | ||||
COP | - | 4.68-5.62 | 4.42-5.35 | 4.49-5.43 | 4.87-5.60 | ||||
Input Current | A | 2.63-8.01 | 4.09-12.59 | 5.54-17.03 | 2.47-7.21 | ||||
Heating | Output Capacity | Kw | 2.73-7.19 | 4.16-10.94 | 5.54-14.57 | 7.41-19.50 | |||
Input Power | Kw | 0.96-2.51 | 1.35-4.19 | 1.68-5.20 | 1.95-6.06 | ||||
COP | - | 2.86-3.37 | 2.61-3.08 | 2.80-3.30 | 3.22-3.80 | ||||
Input Current | A | 4.37-11.50 | 6.18-19.18 | 7.67-23.81 | 3.32-10.30 | ||||
Heating | Output Capacity | Kw | 3.88-9.84 | 5.73-14.56 | 7.90-20.05 | 9.77-24.80 | |||
Input Power | Kw | 0.80-2.23 | 1.23-3.42 | 1.69-4.71 | 2.04-5.70 | ||||
COP | - | 4.42-4.86 | 4.25-4.68 | 4.26-4.69 | 4.35-4.79 | ||||
Input Current | A | 3.65-10.19 | 5.61-15.67 | 7.71-21.54 | 3.47-9.70 | ||||
Cooling A35ºC W7ºC | Cooling Capacity | Kw | 2.74-6.53 | 4.07-9.70 | 5.28-12.58 | 6.57-15.65 | |||
Input Power | Kw | 0.88-2.48 | 1.30-3.66 | 1.59-4.48 | 1.99-5.20 | ||||
EER | - | 2.63-3.10 | 2.65-3.13 | 2.81-3.32 | 3.01-3.31 | ||||
Input Current | A | 4.04-11.35 | 5.96-16.75 | 7.29-20.49 | 3.38-8.84 | ||||
Power Supply | V/PH/HZ | 220-240V/1/50HZ | 380-415V/3/50HZ | ||||||
ErP level (35ºC) | - | A+++ | A+++ | A+++ | A+++ | ||||
ErP level (35ºC) | - | A++ | A++ | A++ | A++ | ||||
Water Side Heat Exchanger | - | Plate heat exchanger | |||||||
Display controller | - | LCD touch screen | |||||||
Backup heater(Optional) | Kw | 3kw | |||||||
Epansion vessel | - | 3L | 5L | ||||||
Refrigerant Type | - | R32 | |||||||
Max Water Temperature(without backup heater) | ºC | 60 | |||||||
Working Ambeint Temperature | ºC | -25-43 | |||||||
Water connection | inch | G1-1/4 | |||||||
Sound pressure Level @1m | outdoor unit | dB(A) | 50 | 52 | 56 | 58 | |||
indoor unit | 27 | 27 | 27 | 27 | |||||
Net Dimension (L*W*H) | outdoor unit | mm | 1070*410*840 | 1070*410*960 | 1070*410*960 | 1150*430*1400 | |||
indoor unit | 475*220*800 | 475*220*800 | 475*220*800 | 475*220*800 |
Market model | WW08VM-O | WW12VM-O | WW16VM-O | WW20VT-O | |||||
Heating | Output Capacity | Kw | 3.23-8.20 | 4.78-12.13 | 6.58-16.71 | 8.14-20.67 | |||
Input Power | Kw | 0.58-1.75 | 0.89-2.75 | 1.21-3.72 | 1.45-4.24 | ||||
COP | - | 4.68-5.62 | 4.42-5.35 | 4.49-5.43 | 4.87-5.60 | ||||
Input Current | A | 2.63-8.01 | 4.09-12.59 | 5.54-17.03 | 2.47-7.21 | ||||
Heating | Output Capacity | Kw | 2.73-7.19 | 4.16-10.94 | 5.54-14.57 | 7.41-19.50 | |||
Input Power | Kw | 0.96-2.51 | 1.35-4.19 | 1.68-5.20 | 1.95-6.06 | ||||
COP | - | 2.86-3.37 | 2.61-3.08 | 2.80-3.30 | 3.22-3.80 | ||||
Input Current | A | 4.37-11.50 | 6.18-19.18 | 7.67-23.81 | 3.32-10.30 | ||||
Heating | Output Capacity | Kw | 3.88-9.84 | 5.73-14.56 | 7.90-20.05 | 9.77-24.80 | |||
Input Power | Kw | 0.80-2.23 | 1.23-3.42 | 1.69-4.71 | 2.04-5.70 | ||||
COP | - | 4.42-4.86 | 4.25-4.68 | 4.26-4.69 | 4.35-4.79 | ||||
Input Current | A | 3.65-10.19 | 5.61-15.67 | 7.71-21.54 | 3.47-9.70 | ||||
Cooling A35ºC W7ºC | Cooling Capacity | Kw | 2.74-6.53 | 4.07-9.70 | 5.28-12.58 | 6.57-15.65 | |||
Input Power | Kw | 0.88-2.48 | 1.30-3.66 | 1.59-4.48 | 1.99-5.20 | ||||
EER | - | 2.63-3.10 | 2.65-3.13 | 2.81-3.32 | 3.01-3.31 | ||||
Input Current | A | 4.04-11.35 | 5.96-16.75 | 7.29-20.49 | 3.38-8.84 | ||||
Power Supply | V/PH/HZ | 220-240V/1/50HZ | 380-415V/3/50HZ | ||||||
ErP level (35ºC) | - | A+++ | A+++ | A+++ | A+++ | ||||
ErP level (35ºC) | - | A++ | A++ | A++ | A++ | ||||
Water Side Heat Exchanger | - | Plate heat exchanger | |||||||
Display controller | - | LCD touch screen | |||||||
Backup heater(Optional) | Kw | 3kw | |||||||
Epansion vessel | - | 3L | 5L | ||||||
Refrigerant Type | - | R32 | |||||||
Max Water Temperature(without backup heater) | ºC | 60 | |||||||
Working Ambeint Temperature | ºC | -25-43 | |||||||
Water connection | inch | G1-1/4 | |||||||
Sound pressure Level @1m | outdoor unit | dB(A) | 50 | 52 | 56 | 58 | |||
indoor unit | 27 | 27 | 27 | 27 | |||||
Net Dimension (L*W*H) | outdoor unit | mm | 1070*410*840 | 1070*410*960 | 1070*410*960 | 1150*430*1400 | |||
indoor unit | 475*220*800 | 475*220*800 | 475*220*800 | 475*220*800 |