Monoblock system:
The Monoblock heat pump is an easy-to-install solution that saves space inside the building. Users receive a complete, hermetic, ready-to-use device that does not require installation of a cooling system and specialist inspection. This solution is related to the necessity of securing the heating medium (water) against freezing in case of power failure.
Features:
Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump. The higher the coefficient, the more heat can be generated using the same amount of electricity.
R32 environmental refrigerant
R32 efficiently works even in small volume compared to existing R410A refrigerant, which decreases the potential hazard of globalwarming. Furthermore, R32 refrigerant is easy to recycle thanks toits single composition.
ENERGY EFFICIENCY RATING LABEL
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R32 air to water heat pump achieves an energy level of A+++ according to Erp directive.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air to water heat pump
Wotech air to water Heat Pump for residential and commercial applications. Offering capacities from 5kW all the way up to 30kW, this ensures a system that will work regardless of your heating and cooling needs. Suitable for new build and refurbishment projects, the solutions are cost-effective with minimised environmental impact.
DHW tank disinfection
The DHW tank disinfection function used to kill legionella by 65℃ water to ensure the health and safety
Climate curve
Using proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort levels based on the changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature can enable Wotech air source heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimum level of comfort in the living spaces.
Floor preheating and drying
Preheat your home floor by activating the Floor Preheating function to prevent possible floor damage. The Floor Preheating function gradually increases the heating temperature of the floor coils.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
Monoblock system:
The Monoblock heat pump is an easy-to-install solution that saves space inside the building. Users receive a complete, hermetic, ready-to-use device that does not require installation of a cooling system and specialist inspection. This solution is related to the necessity of securing the heating medium (water) against freezing in case of power failure.
Features:
Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump. The higher the coefficient, the more heat can be generated using the same amount of electricity.
R32 environmental refrigerant
R32 efficiently works even in small volume compared to existing R410A refrigerant, which decreases the potential hazard of globalwarming. Furthermore, R32 refrigerant is easy to recycle thanks toits single composition.
ENERGY EFFICIENCY RATING LABEL
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R32 air to water heat pump achieves an energy level of A+++ according to Erp directive.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air to water heat pump
Wotech air to water Heat Pump for residential and commercial applications. Offering capacities from 5kW all the way up to 30kW, this ensures a system that will work regardless of your heating and cooling needs. Suitable for new build and refurbishment projects, the solutions are cost-effective with minimised environmental impact.
DHW tank disinfection
The DHW tank disinfection function used to kill legionella by 65℃ water to ensure the health and safety
Climate curve
Using proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort levels based on the changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature can enable Wotech air source heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimum level of comfort in the living spaces.
Floor preheating and drying
Preheat your home floor by activating the Floor Preheating function to prevent possible floor damage. The Floor Preheating function gradually increases the heating temperature of the floor coils.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
Market model | WW08VM | WW12VM | WW16VM | WW20VT | |||||
Heating | Output Capacity | Kw | 4.78-12.13 | 4.78-12.13 | 6.58-16.71 | 8.14-20.67 | |||
Input Power | Kw | 0.58-1.75 | 0.89-2.75 | 1.21-3.72 | 1.45-4.24 | ||||
COP | - | 4.68-5.62 | 4.42-5.35 | 4.49-5.43 | 4.87-5.60 | ||||
Input Current | A | 2.63-8.01 | 4.09-12.59 | 5.54-17.03 | 2.47-7.21 | ||||
Heating | Output Capacity | Kw | 2.73-7.19 | 4.16-10.94 | 5.54-14.57 | 7.41-19.50 | |||
Input Power | Kw | 0.96-2.51 | 1.35-4.19 | 1.68-5.20 | 1.95-6.06 | ||||
COP | - | 2.86-3.37 | 2.61-3.08 | 2.80-3.30 | 3.22-3.80 | ||||
Input Current | A | 4.37-11.50 | 6.18-19.18 | 7.67-23.81 | 3.32-10.30 | ||||
Heating | Output Capacity | Kw | 3.88-9.84 | 5.73-14.56 | 7.90-20.05 | 9.77-24.80 | |||
Input Power | Kw | 0.80-2.23 | 1.23-3.42 | 1.69-4.71 | 2.04-5.70 | ||||
COP | - | 4.42-4.86 | 4.25-4.68 | 4.26-4.69 | 4.35-4.79 | ||||
Input Current | A | 3.65-10.19 | 5.61-15.67 | 7.71-21.54 | 3.47-9.70 | ||||
Cooling A35ºC W7ºC | Cooling Capacity | Kw | 2.74-6.53 | 4.07-9.70 | 5.28-12.58 | 6.57-15.65 | |||
Input Power | Kw | 0.88-2.48 | 1.30-3.66 | 1.59-4.48 | 1.99-5.20 | ||||
EER | - | 2.63-3.10 | 2.65-3.13 | 2.81-3.32 | 3.01-3.31 | ||||
Input Current | A | 4.04-11.35 | 5.96-16.75 | 7.29-20.49 | 3.38-8.84 | ||||
Power Supply | V/PH/HZ | 220-240V/1/50HZ | 380-415V/3/50HZ | ||||||
ErP level (35ºC) | - | A+++ | A+++ | A+++ | A+++ | ||||
ErP level (35ºC) | - | A++ | A++ | A++ | A++ | ||||
Water Side Heat Exchanger | - | Plate heat exchanger | |||||||
Display controller | - | LCD touch screen | |||||||
Backup heater(Optional) | Kw | 3kw | |||||||
Epansion vessel | - | 3L | 5L | ||||||
Refrigerant Type | - | R32 | |||||||
Max Water Temperature(without backup heater) | ºC | 60 | |||||||
Working Ambeint Temperature | ºC | -25-43 | |||||||
Water connection | inch | G1-1/4 | |||||||
Sound pressure Level @1m | dB(A) | 50 | 52 | 56 | 58 | ||||
Net Dimension (L*W*H) | mm | 1085*410*840 | 1150*430*960 | 1150*430*960 | 1150*430*1400 |
Market model | WW08VM | WW12VM | WW16VM | WW20VT | |||||
Heating | Output Capacity | Kw | 4.78-12.13 | 4.78-12.13 | 6.58-16.71 | 8.14-20.67 | |||
Input Power | Kw | 0.58-1.75 | 0.89-2.75 | 1.21-3.72 | 1.45-4.24 | ||||
COP | - | 4.68-5.62 | 4.42-5.35 | 4.49-5.43 | 4.87-5.60 | ||||
Input Current | A | 2.63-8.01 | 4.09-12.59 | 5.54-17.03 | 2.47-7.21 | ||||
Heating | Output Capacity | Kw | 2.73-7.19 | 4.16-10.94 | 5.54-14.57 | 7.41-19.50 | |||
Input Power | Kw | 0.96-2.51 | 1.35-4.19 | 1.68-5.20 | 1.95-6.06 | ||||
COP | - | 2.86-3.37 | 2.61-3.08 | 2.80-3.30 | 3.22-3.80 | ||||
Input Current | A | 4.37-11.50 | 6.18-19.18 | 7.67-23.81 | 3.32-10.30 | ||||
Heating | Output Capacity | Kw | 3.88-9.84 | 5.73-14.56 | 7.90-20.05 | 9.77-24.80 | |||
Input Power | Kw | 0.80-2.23 | 1.23-3.42 | 1.69-4.71 | 2.04-5.70 | ||||
COP | - | 4.42-4.86 | 4.25-4.68 | 4.26-4.69 | 4.35-4.79 | ||||
Input Current | A | 3.65-10.19 | 5.61-15.67 | 7.71-21.54 | 3.47-9.70 | ||||
Cooling A35ºC W7ºC | Cooling Capacity | Kw | 2.74-6.53 | 4.07-9.70 | 5.28-12.58 | 6.57-15.65 | |||
Input Power | Kw | 0.88-2.48 | 1.30-3.66 | 1.59-4.48 | 1.99-5.20 | ||||
EER | - | 2.63-3.10 | 2.65-3.13 | 2.81-3.32 | 3.01-3.31 | ||||
Input Current | A | 4.04-11.35 | 5.96-16.75 | 7.29-20.49 | 3.38-8.84 | ||||
Power Supply | V/PH/HZ | 220-240V/1/50HZ | 380-415V/3/50HZ | ||||||
ErP level (35ºC) | - | A+++ | A+++ | A+++ | A+++ | ||||
ErP level (35ºC) | - | A++ | A++ | A++ | A++ | ||||
Water Side Heat Exchanger | - | Plate heat exchanger | |||||||
Display controller | - | LCD touch screen | |||||||
Backup heater(Optional) | Kw | 3kw | |||||||
Epansion vessel | - | 3L | 5L | ||||||
Refrigerant Type | - | R32 | |||||||
Max Water Temperature(without backup heater) | ºC | 60 | |||||||
Working Ambeint Temperature | ºC | -25-43 | |||||||
Water connection | inch | G1-1/4 | |||||||
Sound pressure Level @1m | dB(A) | 50 | 52 | 56 | 58 | ||||
Net Dimension (L*W*H) | mm | 1085*410*840 | 1150*430*960 | 1150*430*960 | 1150*430*1400 |