Monoblock system:
Wotech Monoblock heat pump combines indoor and outdoor as one module, also connected by water-only pipes, eliminating the need for refrigerant pipes. Furthermore, hydronic components like (the plate heat exchanger, expansion tank, water pump, flow sensors sensor, air vent valves, and safety valve are conveniently situated inside the unit. The R32 monoblock heat pump provides excellent heating performance, particularly at low ambient temperatures, while reducing its carbon emissions with the R32.
Features:
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R32 air to water heat pump achieves an energy level of A+++ according to Erp directive.
R32 environmental refrigerant
Wotech air to water heat pumps currently use the latest green refrigerant -- R32. It is more efficient than those previously used, which is why it requires less refrigerant. Moreover, the refrigerant has much better factors of impact on the environment. lt is a modern solution taking into account both ecological needs and economy of use.
ECOLOGICAL
R32 has one of the lowest GWP values available on the market- 675. It also does not cause damage to the ozone layer, thanks to the ODP value equal to zero. Compared to older solutions, it has as much as 75% less impact on global warming. More importantly, it can also be recycled.
ECONOMIC
Compared to the R410A, the R32 is more energy efficient, which is why the cooling system requires less refrigerant and the equipment is up to 10 percent more efficient.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air souce heat pump
Air source heat pumps extract thermal energy (heat) from the outside air and convert this into heating and hotwater for your home. Air source heat pumps are designed to work in cold temperatures and are suitable for arange of homes, from a small apartment to a large detached home. Air source heat pumps do require electricity to operate, but 75% of the energy required is generated from the outside air, with only 25% being required fromelectricity. This means that 75% of the energy you use will be from a renewable source, which will reduce youremissions and CO2 impact.
DHW tank disinfection
If sanitary hot water is provided directly from the HWT (hot water tank), the water inside the tank must be periodically heated to temperatures over 65°C to eliminate the risk of bacterial growth inside the storage tank. For a healthy life, Wotech air to water heat pumps control this function automatically based on parameter settings.
Climate curve
Using proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort levels based on the changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature can enable Wotech air source heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimum level of comfort in the living spaces.
Floor preheating and drying
You can protect your home floor by activating the Floor Preheating feature, which slowly increases the heating temperature of the floor coils, preventing floor damage and transitioning smoothly to the heating mode.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
Monoblock system:
Wotech Monoblock heat pump combines indoor and outdoor as one module, also connected by water-only pipes, eliminating the need for refrigerant pipes. Furthermore, hydronic components like (the plate heat exchanger, expansion tank, water pump, flow sensors sensor, air vent valves, and safety valve are conveniently situated inside the unit. The R32 monoblock heat pump provides excellent heating performance, particularly at low ambient temperatures, while reducing its carbon emissions with the R32.
Features:
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R32 air to water heat pump achieves an energy level of A+++ according to Erp directive.
R32 environmental refrigerant
Wotech air to water heat pumps currently use the latest green refrigerant -- R32. It is more efficient than those previously used, which is why it requires less refrigerant. Moreover, the refrigerant has much better factors of impact on the environment. lt is a modern solution taking into account both ecological needs and economy of use.
ECOLOGICAL
R32 has one of the lowest GWP values available on the market- 675. It also does not cause damage to the ozone layer, thanks to the ODP value equal to zero. Compared to older solutions, it has as much as 75% less impact on global warming. More importantly, it can also be recycled.
ECONOMIC
Compared to the R410A, the R32 is more energy efficient, which is why the cooling system requires less refrigerant and the equipment is up to 10 percent more efficient.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air souce heat pump
Air source heat pumps extract thermal energy (heat) from the outside air and convert this into heating and hotwater for your home. Air source heat pumps are designed to work in cold temperatures and are suitable for arange of homes, from a small apartment to a large detached home. Air source heat pumps do require electricity to operate, but 75% of the energy required is generated from the outside air, with only 25% being required fromelectricity. This means that 75% of the energy you use will be from a renewable source, which will reduce youremissions and CO2 impact.
DHW tank disinfection
If sanitary hot water is provided directly from the HWT (hot water tank), the water inside the tank must be periodically heated to temperatures over 65°C to eliminate the risk of bacterial growth inside the storage tank. For a healthy life, Wotech air to water heat pumps control this function automatically based on parameter settings.
Climate curve
Using proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort levels based on the changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature can enable Wotech air source heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimum level of comfort in the living spaces.
Floor preheating and drying
You can protect your home floor by activating the Floor Preheating feature, which slowly increases the heating temperature of the floor coils, preventing floor damage and transitioning smoothly to the heating mode.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
English