R32 A+++ Residentail Inverter Split Air Source Heat Pump
You are here: Home » Products » Other » R32 A+++ Residentail Inverter Split Air Source Heat Pump

Product Category

R32 A+++ Residentail Inverter Split Air Source Heat Pump

Availability:


Split System

The split system design of the heat pump, consisting of an indoor and outdoor unit, requires specialized installation by an installer qualified to work with refrigerant gases. The advantage of this solution is that there is no risk of freezing of the heating medium in case of power failure. Unlike monoblock pumps, the unit outside the building uses a non-freezing refrigerant.

R32_split heat pump


Features:

R32 Gas-Low GWP
Smart logic to control multiple heat source
Climate curves suitable for different countries

Good SCOP,energy label rating W35℃ A+++/ W55℃ A++

House heating,cooling and domestic hot water

Full inverter system,Stable and efficient performance.


R32 environmental refrigerant

Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.


图片1

ENERGY EFFICIENCY RATING LABEL

Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump.  The higher the coefficient, the more heat can be generated using the same amount of electricity.

R32_split heat pump



MITSUBISHI Compressor

we choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.

Ha067772da9634f4a8155d5c9df107697f1590716310_r87

Split Series Application Diagram

Split Series Application Diagram


DHW tank disinfection

If sanitary hot water is provided directly from the HWT (hot water tank), the water inside the tank must be periodically heated to temperatures over 65°C to eliminate the risk of bacterial growth inside the storage tank. For a healthy life, Wotech air to water heat pumps control this function automatically based on parameter settings.


图片2

Climate curve

Users can set up the system according to their ideal comfort levels based on the changing levels of heat demand, insulation, etc., with proprietary Heating Curve Logic. By continually monitoring and adjusting the outlet water temperature in opposite directions with the current ambient temperature levels, the Wotech air to water heat pump will ensure optimal comfort in the living spaces by adjusting the outlet water temperature based on the ambient temperature.

图片4


Floor preheating and drying

You can protect your home floor by activating the Floor Preheating feature, which slowly increases the heating temperature of the floor coils, preventing floor damage and transitioning smoothly to the heating mode.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.

图片5






Market model


WW08VM-O

WW12VM-O

WW16VM-O

WW20VT-O

Heating
A 7ºC W35ºC

Output Capacity

Kw

3.23-8.204.78-12.13

6.58-16.71

8.14-20.67

Input Power

Kw

0.58-1.750.89-2.75

1.21-3.72

1.45-4.24

COP

-4.68-5.624.42-5.35

4.49-5.43

4.87-5.60

Input Current

A

2.63-8.014.09-12.59

5.54-17.03

2.47-7.21

Heating
A 7ºC W55ºC

Output Capacity

Kw

2.73-7.194.16-10.94

5.54-14.57

7.41-19.50

Input Power

Kw0.96-2.511.35-4.19

1.68-5.20

1.95-6.06

COP

-2.86-3.372.61-3.08

2.80-3.30

3.22-3.80

Input Current

A

4.37-11.506.18-19.18

7.67-23.81

3.32-10.30

Heating
A 20ºC W55ºC

Output Capacity

Kw

3.88-9.845.73-14.56

7.90-20.05

9.77-24.80

Input Power

Kw

0.80-2.23
1.23-3.42

1.69-4.71

2.04-5.70

COP

-

4.42-4.864.25-4.68

4.26-4.69

4.35-4.79

Input Current

A

3.65-10.195.61-15.67

7.71-21.54

3.47-9.70
Cooling
A35ºC W7ºC
Cooling CapacityKw2.74-6.534.07-9.705.28-12.586.57-15.65
Input PowerKw0.88-2.48
1.30-3.661.59-4.481.99-5.20
EER-2.63-3.102.65-3.132.81-3.323.01-3.31
Input CurrentA4.04-11.355.96-16.757.29-20.493.38-8.84

Power Supply

V/PH/HZ

220-240V/1/50HZ380-415V/3/50HZ

ErP level (35ºC)

-A+++A+++A+++

A+++

ErP level (35ºC)

-

A++A++A++

A++

Water Side Heat Exchanger

-

Plate heat exchanger
Display controller

-

LCD touch screen

Backup heater(Optional)

Kw

3kw

Epansion vessel

-

3L5L
Refrigerant Type

-

R32

Max Water Temperature(without backup heater)

ºC

60

Working Ambeint Temperature

ºC

-25-43

Water connection

inch

G1-1/4

Sound pressure Level @1m

outdoor unit

dB(A)

505256

58

indoor unit27272727

Net Dimension (L*W*H)

outdoor unit

mm

1070*410*8401070*410*9601070*410*960

1150*430*1400

indoor unit475*220*800475*220*800475*220*800475*220*800


Previous: 
Next: 
  Whatsapp:+8618128753142
  Skype:18128753142
  Tel:+86-757-22210763
     Address:No.34, South Road, Yongfeng Industrial Park, Lunjiao, Shunde, Foshan, Guangdong PRC.

QUICK LINKS

PRODUCT CATEGORY

PRODUCT INQUIRY

Product Inquiry
Copyright ©2022 by Guangdong Wotech Renewable Energy & Technology Co., Ltd. Sitemap. Support By LeadongPrivacy Policy