Monoblock system:
What is Monoblock heat pump?
The air-to-water heat pump for home heating and domestic hot water, Monoblock type , consists of an outdoor unit and a control panel. ln contrast to split devices, in monoblock heat pumps the entire refrigeration system is located in one unit mounted outside the building. All connections containing refrigerant gas are made and filled with refrigerant gas at the production stage of the pumps. The gas is hermetically sealed in the outdoor unit, and the tightness of the system is carefully checked by the manufacturer, During the assembly of monoblocks, only pipes filled with water or glycol are led out of the outdoor unit.
Advantages of monoblock heat pump:
Refrigerant circuit completely contained in monoblock
No refrigeration certificate required for installation and maintenance
Suitable for both indoor and outdoor installation
Lower installation costs.
Features:
Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump. The higher the coefficient, the more heat can be generated using the same amount of electricity.
R32 environmental refrigerant
New Wotech heat pumps have been applied to the new gas solution of the R32 multifunction series. The advantages are: 1. Compared to the R410A refrigerant, the R32 heat pump has a GWP of only one-third, so its environmental performance is even better. 2.High energy efficiency: It reaches A+++ energy level according to EU regulation. By harnessing the heat from the outside air, you use much less energy while still enjoying a steady and pleasant level of comfort. Maintenance requirements are minimal, keeping your running costs low. Thanks to inverter technology, your energy savings are even greater.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air to water heat pump
Wotech air to water Heat Pump for residential and commercial applications. Offering capacities from 5kW all the way up to 30kW, this ensures a system that will work regardless of your heating and cooling needs. Suitable for new build and refurbishment projects, the solutions are cost-effective with minimised environmental impact.
DHW tank disinfection
The water inside the HWT (hot water tank) must be periodically heated to temperatures over 65°C to eliminate bacterial growth inside the tank if domestic hot water is provided directly from the tank.For healthy living, Wotech air source heat pump automatically controls this function based on parameter settings.
Climate curve
Using proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort levels based on the changing heat demand,insulation levels, etc Wotech air to water heat pump can adjust the outlet water temperatures based on the ambient temperature，by continually monitoring and adjusting it in opposite direction with the current ambient temperature levels to ensure the optimum comfort in the living spaces
Floor preheating and drying
With Floor Preheating, you can avoid potential floor damage and smoothly transition from the preheating to the heating function, avoiding any floor damage.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
Monoblock system:
What is Monoblock heat pump?
The air-to-water heat pump for home heating and domestic hot water, Monoblock type , consists of an outdoor unit and a control panel. ln contrast to split devices, in monoblock heat pumps the entire refrigeration system is located in one unit mounted outside the building. All connections containing refrigerant gas are made and filled with refrigerant gas at the production stage of the pumps. The gas is hermetically sealed in the outdoor unit, and the tightness of the system is carefully checked by the manufacturer, During the assembly of monoblocks, only pipes filled with water or glycol are led out of the outdoor unit.
Advantages of monoblock heat pump:
Refrigerant circuit completely contained in monoblock
No refrigeration certificate required for installation and maintenance
Suitable for both indoor and outdoor installation
Lower installation costs.
Features:
Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump. The higher the coefficient, the more heat can be generated using the same amount of electricity.
R32 environmental refrigerant
New Wotech heat pumps have been applied to the new gas solution of the R32 multifunction series. The advantages are: 1. Compared to the R410A refrigerant, the R32 heat pump has a GWP of only one-third, so its environmental performance is even better. 2.High energy efficiency: It reaches A+++ energy level according to EU regulation. By harnessing the heat from the outside air, you use much less energy while still enjoying a steady and pleasant level of comfort. Maintenance requirements are minimal, keeping your running costs low. Thanks to inverter technology, your energy savings are even greater.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air to water heat pump
Wotech air to water Heat Pump for residential and commercial applications. Offering capacities from 5kW all the way up to 30kW, this ensures a system that will work regardless of your heating and cooling needs. Suitable for new build and refurbishment projects, the solutions are cost-effective with minimised environmental impact.
DHW tank disinfection
The water inside the HWT (hot water tank) must be periodically heated to temperatures over 65°C to eliminate bacterial growth inside the tank if domestic hot water is provided directly from the tank.For healthy living, Wotech air source heat pump automatically controls this function based on parameter settings.
Climate curve
Using proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort levels based on the changing heat demand,insulation levels, etc Wotech air to water heat pump can adjust the outlet water temperatures based on the ambient temperature，by continually monitoring and adjusting it in opposite direction with the current ambient temperature levels to ensure the optimum comfort in the living spaces
Floor preheating and drying
With Floor Preheating, you can avoid potential floor damage and smoothly transition from the preheating to the heating function, avoiding any floor damage.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
English