Monoblock system:
Wotech provides the monoblock heat pump with main circulation pump built inside. When installing the unit, installer should connect the heat pump with other parts including the buffer tank (for space heating/cooling), storage water tank (for domestic hot water) and water pumps (for space heating/cooling water circulation and domestic hot water). External fittings are also needed in cluding the safety valve, water refill valve and hot water valves (three-way valve).Temperature sensor should be added in the storage water tank. Additional electric heater can be installed in the DHW tank or the buffer tank which can getthe control signal from the heat pump.
Features:
Using energy-efficient inverter compressors, Wotech heat pumps have variable heating capacities that can be adjusted.In this way, the whole system will be more efficient and the pump's operation costs will be reduced.Heat is generated more efficiently with a higher coefficient than with a lower coefficient.
R32 environmental refrigerant
New Wotech heat pumps have been applied to the new gas solution of the R32 multifunction series. The advantages are: 1. Compared to the R410A refrigerant, the R32 heat pump has a GWP of only one-third, so its environmental performance is even better. 2.High energy efficiency: It reaches A+++ energy level according to EU regulation. By harnessing the heat from the outside air, you use much less energy while still enjoying a steady and pleasant level of comfort. Maintenance requirements are minimal, keeping your running costs low. Thanks to inverter technology, your energy savings are even greater.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Wifi App control
Easily control your climate remotely from virtually anywhere using your smartphone or tablet. Download the application for free via the App Store and achieve optimal temperature conditions with great energy savings.
DHW tank disinfection
If sanitary hot water is provided directly from the HWT (hot water tank), the water inside the tank must be periodically heated to temperatures over 65°C to eliminate the risk of bacterial growth inside the storage tank. For a healthy life, Wotech air to water heat pumps control this function automatically based on parameter settings.
Climate curve
With proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort level based on changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature allows Wotech R32/R290 multifunction heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimal level of comfort in the living space.
Floor preheating and drying
You can protect your home floor by activating the Floor Preheating feature, which slowly increases the heating temperature of the floor coils, preventing floor damage and transitioning smoothly to the heating mode.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
Monoblock system:
Wotech provides the monoblock heat pump with main circulation pump built inside. When installing the unit, installer should connect the heat pump with other parts including the buffer tank (for space heating/cooling), storage water tank (for domestic hot water) and water pumps (for space heating/cooling water circulation and domestic hot water). External fittings are also needed in cluding the safety valve, water refill valve and hot water valves (three-way valve).Temperature sensor should be added in the storage water tank. Additional electric heater can be installed in the DHW tank or the buffer tank which can getthe control signal from the heat pump.
Features:
Using energy-efficient inverter compressors, Wotech heat pumps have variable heating capacities that can be adjusted.In this way, the whole system will be more efficient and the pump's operation costs will be reduced.Heat is generated more efficiently with a higher coefficient than with a lower coefficient.
R32 environmental refrigerant
New Wotech heat pumps have been applied to the new gas solution of the R32 multifunction series. The advantages are: 1. Compared to the R410A refrigerant, the R32 heat pump has a GWP of only one-third, so its environmental performance is even better. 2.High energy efficiency: It reaches A+++ energy level according to EU regulation. By harnessing the heat from the outside air, you use much less energy while still enjoying a steady and pleasant level of comfort. Maintenance requirements are minimal, keeping your running costs low. Thanks to inverter technology, your energy savings are even greater.
ENERGY EFFICIENCY RATING LABEL
Wotech R32 Air to Water Heat Pump is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does it use R32 green gas and inverter technology, but it is also rated with the A++ energy label. With a top energy rating of A+++, the unit is energy efficient and can significantly reduce the user's energy bill.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Wifi App control
Easily control your climate remotely from virtually anywhere using your smartphone or tablet. Download the application for free via the App Store and achieve optimal temperature conditions with great energy savings.
DHW tank disinfection
If sanitary hot water is provided directly from the HWT (hot water tank), the water inside the tank must be periodically heated to temperatures over 65°C to eliminate the risk of bacterial growth inside the storage tank. For a healthy life, Wotech air to water heat pumps control this function automatically based on parameter settings.
Climate curve
With proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort level based on changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature allows Wotech R32/R290 multifunction heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimal level of comfort in the living space.
Floor preheating and drying
You can protect your home floor by activating the Floor Preheating feature, which slowly increases the heating temperature of the floor coils, preventing floor damage and transitioning smoothly to the heating mode.In addition to protecting the installation, the Floor Drying Up function ensures the heat pump operates optimally and effectively by removing any residual moisture from newly installed floor coils.
English