Monoblock system:
What is Monoblock heat pump?
The air-to-water heat pump for home heating and domestic hot water, Monoblock type , consists of an outdoor unit and a control panel. ln contrast to split devices, in monoblock heat pumps the entire refrigeration system is located in one unit mounted outside the building. All connections containing refrigerant gas are made and filled with refrigerant gas at the production stage of the pumps. The gas is hermetically sealed in the outdoor unit, and the tightness of the system is carefully checked by the manufacturer, During the assembly of monoblocks, only pipes filled with water or glycol are led out of the outdoor unit.
Features:
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R32/R290 air to water heat pump achieves an energy level of A+++ according to Erp directive.
R32 environmental refrigerant
Wotech air to water heat pumps currently use the latest green refrigerant -- R32. It is more efficient than those previously used, which is why it requires less refrigerant. Moreover, the refrigerant has much better factors of impact on the environment. lt is a modern solution taking into account both ecological needs and economy of use.
ECOLOGICAL
R32 has one of the lowest GWP values available on the market- 675. It also does not cause damage to the ozone layer, thanks to the ODP value equal to zero. Compared to older solutions, it has as much as 75% less impact on global warming. More importantly, it can also be recycled.
ECONOMIC
Compared to the R410A, the R32 is more energy efficient, which is why the cooling system requires less refrigerant and the equipment is up to 10 percent more efficient.
ENERGY EFFICIENCY RATING LABEL
Wotech Air Source Heat Pump incorporates a high-efficiency compressor, a completely new high-efficiency heat exchange system, high-precision electronic expansion valves and other accessories. COP has met national level energy efficiency standards and received national energy efficiency certification.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air to water heat pump
Air to water heat pumps constitute an eco-friendly solution and provide the highest energy and cost savings when compared with different heating systems, as only 25% of the required energy derives from electricity and the remaining 75% is procured directly from the environment.
According to the European Heat Pump Association (EHPA), heat pumps exhibit the lowest energy demand compared to other heating systems, with approximately 73.5% lower than oil fueled heating systems and 70% lower than gasheating systems.
Full inverter technology
DC inverter conversion techniques can achieve equilibrium temperatures, saving power and energy. It adopts DC frequency conversion continuously variable adjustment, which has the advantages of strong power, high efficiency, low noise, stable and reliable performance, and long service life.
Climate curve
With proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort level based on changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature allows Wotech R32/R290 multifunction heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimal level of comfort in the living space.
Wifi App control
Easily control your climate remotely from virtually anywhere using your smartphone or tablet. Download the application for free via the App Store and achieve optimal temperature conditions with great energy savings.
Monoblock system:
What is Monoblock heat pump?
The air-to-water heat pump for home heating and domestic hot water, Monoblock type , consists of an outdoor unit and a control panel. ln contrast to split devices, in monoblock heat pumps the entire refrigeration system is located in one unit mounted outside the building. All connections containing refrigerant gas are made and filled with refrigerant gas at the production stage of the pumps. The gas is hermetically sealed in the outdoor unit, and the tightness of the system is carefully checked by the manufacturer, During the assembly of monoblocks, only pipes filled with water or glycol are led out of the outdoor unit.
Features:
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R32/R290 air to water heat pump achieves an energy level of A+++ according to Erp directive.
R32 environmental refrigerant
Wotech air to water heat pumps currently use the latest green refrigerant -- R32. It is more efficient than those previously used, which is why it requires less refrigerant. Moreover, the refrigerant has much better factors of impact on the environment. lt is a modern solution taking into account both ecological needs and economy of use.
ECOLOGICAL
R32 has one of the lowest GWP values available on the market- 675. It also does not cause damage to the ozone layer, thanks to the ODP value equal to zero. Compared to older solutions, it has as much as 75% less impact on global warming. More importantly, it can also be recycled.
ECONOMIC
Compared to the R410A, the R32 is more energy efficient, which is why the cooling system requires less refrigerant and the equipment is up to 10 percent more efficient.
ENERGY EFFICIENCY RATING LABEL
Wotech Air Source Heat Pump incorporates a high-efficiency compressor, a completely new high-efficiency heat exchange system, high-precision electronic expansion valves and other accessories. COP has met national level energy efficiency standards and received national energy efficiency certification.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
Two heating circuits [as standard]
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Air to water heat pump
Air to water heat pumps constitute an eco-friendly solution and provide the highest energy and cost savings when compared with different heating systems, as only 25% of the required energy derives from electricity and the remaining 75% is procured directly from the environment.
According to the European Heat Pump Association (EHPA), heat pumps exhibit the lowest energy demand compared to other heating systems, with approximately 73.5% lower than oil fueled heating systems and 70% lower than gasheating systems.
Full inverter technology
DC inverter conversion techniques can achieve equilibrium temperatures, saving power and energy. It adopts DC frequency conversion continuously variable adjustment, which has the advantages of strong power, high efficiency, low noise, stable and reliable performance, and long service life.
Climate curve
With proprietary Heating Curve Logic, users can set up the system to meet their optimum comfort level based on changing heat demand, insulation levels, etc. A constant monitoring of the current ambient temperature allows Wotech R32/R290 multifunction heat pump to adjust the outlet water temperature in the opposite direction to ensure the optimal level of comfort in the living space.
Wifi App control
Easily control your climate remotely from virtually anywhere using your smartphone or tablet. Download the application for free via the App Store and achieve optimal temperature conditions with great energy savings.
Market model | WW08VM | WW12VM | WW16VM | WW20VT | |||||
Heating | Output Capacity | Kw | 4.78-12.13 | 4.78-12.13 | 6.58-16.71 | 8.14-20.67 | |||
Input Power | Kw | 0.58-1.75 | 0.89-2.75 | 1.21-3.72 | 1.45-4.24 | ||||
COP | - | 4.68-5.62 | 4.42-5.35 | 4.49-5.43 | 4.87-5.60 | ||||
Input Current | A | 2.63-8.01 | 4.09-12.59 | 5.54-17.03 | 2.47-7.21 | ||||
Heating | Output Capacity | Kw | 2.73-7.19 | 4.16-10.94 | 5.54-14.57 | 7.41-19.50 | |||
Input Power | Kw | 0.96-2.51 | 1.35-4.19 | 1.68-5.20 | 1.95-6.06 | ||||
COP | - | 2.86-3.37 | 2.61-3.08 | 2.80-3.30 | 3.22-3.80 | ||||
Input Current | A | 4.37-11.50 | 6.18-19.18 | 7.67-23.81 | 3.32-10.30 | ||||
Heating | Output Capacity | Kw | 3.88-9.84 | 5.73-14.56 | 7.90-20.05 | 9.77-24.80 | |||
Input Power | Kw | 0.80-2.23 | 1.23-3.42 | 1.69-4.71 | 2.04-5.70 | ||||
COP | - | 4.42-4.86 | 4.25-4.68 | 4.26-4.69 | 4.35-4.79 | ||||
Input Current | A | 3.65-10.19 | 5.61-15.67 | 7.71-21.54 | 3.47-9.70 | ||||
Cooling A35ºC W7ºC | Cooling Capacity | Kw | 2.74-6.53 | 4.07-9.70 | 5.28-12.58 | 6.57-15.65 | |||
Input Power | Kw | 0.88-2.48 | 1.30-3.66 | 1.59-4.48 | 1.99-5.20 | ||||
EER | - | 2.63-3.10 | 2.65-3.13 | 2.81-3.32 | 3.01-3.31 | ||||
Input Current | A | 4.04-11.35 | 5.96-16.75 | 7.29-20.49 | 3.38-8.84 | ||||
Power Supply | V/PH/HZ | 220-240V/1/50HZ | 380-415V/3/50HZ | ||||||
ErP level (35ºC) | - | A+++ | A+++ | A+++ | A+++ | ||||
ErP level (35ºC) | - | A++ | A++ | A++ | A++ | ||||
Water Side Heat Exchanger | - | Plate heat exchanger | |||||||
Display controller | - | LCD touch screen | |||||||
Backup heater(Optional) | Kw | 3kw | |||||||
Epansion vessel | - | 3L | 5L | ||||||
Refrigerant Type | - | R32 | |||||||
Max Water Temperature(without backup heater) | ºC | 60 | |||||||
Working Ambeint Temperature | ºC | -25-43 | |||||||
Water connection | inch | G1-1/4 | |||||||
Sound pressure Level @1m | dB(A) | 50 | 52 | 56 | 58 | ||||
Net Dimension (L*W*H) | mm | 1085*410*840 | 1150*430*960 | 1150*430*960 | 1150*430*1400 |
Market model | WW08VM | WW12VM | WW16VM | WW20VT | |||||
Heating | Output Capacity | Kw | 4.78-12.13 | 4.78-12.13 | 6.58-16.71 | 8.14-20.67 | |||
Input Power | Kw | 0.58-1.75 | 0.89-2.75 | 1.21-3.72 | 1.45-4.24 | ||||
COP | - | 4.68-5.62 | 4.42-5.35 | 4.49-5.43 | 4.87-5.60 | ||||
Input Current | A | 2.63-8.01 | 4.09-12.59 | 5.54-17.03 | 2.47-7.21 | ||||
Heating | Output Capacity | Kw | 2.73-7.19 | 4.16-10.94 | 5.54-14.57 | 7.41-19.50 | |||
Input Power | Kw | 0.96-2.51 | 1.35-4.19 | 1.68-5.20 | 1.95-6.06 | ||||
COP | - | 2.86-3.37 | 2.61-3.08 | 2.80-3.30 | 3.22-3.80 | ||||
Input Current | A | 4.37-11.50 | 6.18-19.18 | 7.67-23.81 | 3.32-10.30 | ||||
Heating | Output Capacity | Kw | 3.88-9.84 | 5.73-14.56 | 7.90-20.05 | 9.77-24.80 | |||
Input Power | Kw | 0.80-2.23 | 1.23-3.42 | 1.69-4.71 | 2.04-5.70 | ||||
COP | - | 4.42-4.86 | 4.25-4.68 | 4.26-4.69 | 4.35-4.79 | ||||
Input Current | A | 3.65-10.19 | 5.61-15.67 | 7.71-21.54 | 3.47-9.70 | ||||
Cooling A35ºC W7ºC | Cooling Capacity | Kw | 2.74-6.53 | 4.07-9.70 | 5.28-12.58 | 6.57-15.65 | |||
Input Power | Kw | 0.88-2.48 | 1.30-3.66 | 1.59-4.48 | 1.99-5.20 | ||||
EER | - | 2.63-3.10 | 2.65-3.13 | 2.81-3.32 | 3.01-3.31 | ||||
Input Current | A | 4.04-11.35 | 5.96-16.75 | 7.29-20.49 | 3.38-8.84 | ||||
Power Supply | V/PH/HZ | 220-240V/1/50HZ | 380-415V/3/50HZ | ||||||
ErP level (35ºC) | - | A+++ | A+++ | A+++ | A+++ | ||||
ErP level (35ºC) | - | A++ | A++ | A++ | A++ | ||||
Water Side Heat Exchanger | - | Plate heat exchanger | |||||||
Display controller | - | LCD touch screen | |||||||
Backup heater(Optional) | Kw | 3kw | |||||||
Epansion vessel | - | 3L | 5L | ||||||
Refrigerant Type | - | R32 | |||||||
Max Water Temperature(without backup heater) | ºC | 60 | |||||||
Working Ambeint Temperature | ºC | -25-43 | |||||||
Water connection | inch | G1-1/4 | |||||||
Sound pressure Level @1m | dB(A) | 50 | 52 | 56 | 58 | ||||
Net Dimension (L*W*H) | mm | 1085*410*840 | 1150*430*960 | 1150*430*960 | 1150*430*1400 |