R290 A+++ Residential Inverter Monoblock Air Source Heat Pump
You are here: Home » Products » Other » R290 A+++ Residential Inverter Monoblock Air Source Heat Pump

Product Category

R290 A+++ Residential Inverter Monoblock Air Source Heat Pump

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

R290 heat pump water heater



  • R290 Green Gas at low GWP(3)

  • Good SCOP, energy label rating W35℃ A+++/ W55℃ A++

  • Smart logic to control multiple heat source

  • Climate curves suitable for different countries

  • Hot water up to 75C, suitable for underfloor/radiator heating/fan coil

  • Full inverter system, Stable and efficient performance


Space heating Series is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does Space heating Series use R290 green gas, but also is rated with A+++ energy label. With top energy rating A+++, the unit is energy efficient and can greatly reduce energy bills for users.

R290 energy label A+++

key function

Key Functions:

R290 Green Gas at low GWP(3)

  • R290 is one of the best refrigerant available for mass production upto now: Negligible Global Warming Potential(GWP) and degradation time is considered in monthes

  • Zero ozone layer depletion potential(ODP)

  • Permanent green

  • Less load for the same performance

  • Low energy consumption and higher efficiency

Refrigerant Revolution

DHW tank disinfection

By heating the water in the system to 65°C, the high temperature kills most bacteria (including Legionella).

DHW tank disinfection

Climate cruve

Eco mode is an intelligent energy-saving mode that can minimize energy consumption while ensuring comfortable temperatures, achieving green environmental protection for air source heat pumps.


Floor preheating and drying

Protect your home floor by activating the Floor Preheating function which slowly increases the heating temperature of the floor coils, avoiding possible floor damaging and transitioning smoothly to the heating function. The Floor Drying Up function provides an additional solution to the installer as it helps remove any residual moisture from newly installed floor coils, further protecting the installation and ensuring the optimal and effective operation of the heat pump.


Two heating circuits

Two heating circuits [as standard]

  • More flexibility thanks to two control zones

  • Independent control of underfloor heating and radiator heating temperature

  • No need to purchase an extension module for second heating system


Application with multiple heat source

Application with multiple heat source

Smart design to work with other heating facilities in your house, like solar, gas boiler and etc, make sure you to pay the lowest bill for heating !

Application with multiple heat source

How efficient is an air to water heat pump?

Air-to-water heat pumps are gaining popularity because more and more people are looking for affordable and eco-friendly heating solutions. By using the surrounding air to generate heat, these heat pumps have become a dependable and efficient choice for homeowners who want to reduce their carbon footprint and save energy.

We will delve into the details of air to water heat pumps and their effectiveness.

When you use an air-to-water heat pump, you are reducing your annual carbon emissions by up to 2,800 kg of CO2. This is comparable to consuming more than 1000 liters of gasoline! The reason behind this is that the pump generates a greater amount of heat compared to the electricity it consumes.

Electricity is used by air to water heat pumps, yet they surpass traditional heating systems in terms of efficiency. By utilizing a condenser, heat exchanger and refrigerant, these pumps generate significantly more thermal energy compared to the amount of electricity they consume.

In reality, an air to water heat pump has a performance rate of 200%-400%, which is also referred to as a coefficient of performance (COP) of 2 to 4. This implies that it can generate electricity up to four times the amount it consumes. It achieves this by harnessing low-quality air and transferring it through the system to create efficient heating and hot water for your house.

Ultimately, as long as your heat pump has a COP greater than 1, you are producing more heat energy than the electrical energy you are using. In general, air-to-water heat pumps exhibit a COP of approximately 3, indicating that they produce three times more heat than the amount of electricity they consume.

     Address:No.34, South Road, Yongfeng Industrial Park, Lunjiao, Shunde, Foshan, Guangdong PRC.




Copyright ©2022 by Guangdong Wotech Renewable Energy & Technology Co., Ltd. Sitemap. Support By LeadongPrivacy Policy